The Yeti Vehicle Integration Kit contains everything you’ll need to charge your Yeti Power Station (1000X and above) from your vehicle’s alternator, whether you’re on or off the pavement. Simply switch the Yeti Link to “car mode” and connect to start collecting power while on the move.

NOTE: Requires installation by a qualified professional.

YETI LINK VEHICLE INTEGRATION

Off-road? Rough terrain? No problem
The new and improved design of the Yeti Link Vehicle Integration Kit comes with an integrated locking mechanism to provide a more secure and stable connection that won’t jostle loose when the going gets rough. Take your adventure rig off-road and off-grid. We’ll keep you connected.

Everything you need to connect & recharge
The Yeti Link Vehicle Integration Kit comes with everything you’ll need to connect your Yeti power station to your vehicle’s alternator, including a Male EC8 to Ring Terminal and a EC8 12ft extension cable.

Build your portable power system
Pair the Yeti Link Vehicle Integration Kit with Goal Zero Boulder Solar Panels to create a custom portable power system that can recharge your Yeti power station both on the road and off-grid.

HOW IT WORKS

NOTE: Link must be in Vehicle Mode to utilize this feature or it will drain your vehicle’s battery. All Links come standard set in "Tank Mode." Tank Mode allows you to chain a Yeti Tank Expansion Battery to a Yeti Lithium Portable Power Station to increase your energy storage capacity.

EC8 Male to Ring Cable allows you to connect directly to your vehicle's 12V battery or alternator's /- terminals. EC8 12' Extension Cable connects the Ring Cable to the back of your Yeti Link. Link locking mechanism secures cables tightly to the Link.

When in “Vehicle Mode,” the Yeti Link pulls power from your vehicle’s alternator while the vehicle is running and stops pulling power when the vehicle is off. While at camp, connect your Yeti with our Boulder or Nomad solar panels to collect and store power through every leg of the journey. When your energy source is portable and sustainable, the possibilities are endless.

If your vehicle alternator is rated less than 150 Amps, we do not recommend that you idle your vehicle to charge your Yeti power station. Idle charging the Yeti power station could cause your alternator to overheat and shorten the life of your alternator.

TECH SPECS

Charge Times

• Max Input from Yeti Link to
• Goal Zero Yeti 1000/1000X: 454-605W
• Goal Zero Yeti 1400/1500X: 454-750W
• Goal Zero Yeti 3000/3000X: 750W
• Goal Zero Yeti 6000X: 750W

Ports

• YETI LINK EXPANSION MODULE
• Do not exceed 22V input
• 8mm Charging Port (input): 14 - 22V Do not exceed 150W (10A) per port
• External Battery Connector (output): 65A charge controller
• External Battery Connector (Input/Output): 10.7-15V. Do not exceed 15V
• YETI X 120W POWER SUPPLY
• Input: AC Wall Plug 100-240V - 50/60Hz 3.0A
• Output: 8.0mm 16V- 7.5A, 120W

General

• YETI LINK EXPANSION MODULE
• Weight: 1.5 lbs (680 g)
• Dimensions: 10.25 x 3.3 x 1.5 in (26 x 8.4 x 3.8 cm)
• Warranty 12 months
• YETI X 120W POWER SUPPLY
• Gauge: 16AWG
• Cable Length: 9' 4"
• Dimensions: 2.5 x 5.9 x 1.4 in (6.5 x 15 x 3.5 cm)
• EC8 12FT EXTENSION CABLE
• Cord Length: 12 feet
• Gauge: 8
• MALE EC8 TO RING TERMINAL
• Cord Length: 39 in (99 cm)
• Gauge: 8
• Fuse: 80A